SAW 2.5" Threaded Body Emulsion Shock

Sway-A-Way 2.5” Shocks are designed for applications including off-road buggies, long travel sand cars, trucks, pre runners, extreme rock crawlers, and performance street vehicles. These shocks can be rebuilt and re valved by the owner, and are available in remote reservoir, top mount piggyback, bottom mount piggy back, emulsion, air shock and bypass designs. Both the piggyback and the bypass designs feature a top that allows it to swivels 360 degrees for easy fitment. Bypass shocks are available in left and right hand designs. Shock travel ranges from 8” to 18” in 2” increments.

All 2.5” shocks come standard with bright silver cadmium plated cylinders and high strength 7/8” Nitro Steel shafts that are chip and rust resistant. All 2.5 air shocks come with a tubular 1 5/8” Nitro Steel shafts. All shock cylinders except the air, bottom mount piggyback, and bypass shocks are threaded for both single & dual rate applications, and use standard 3” I.D. coil springs.

Shocks come standard with high strength Com 10 Teflon lined steel spherical bearings on each end with 304 stainless spacers. All aluminum parts are red anodized. Standard nitrogen pressure is 200 PSI for all shocks except the air shocks. Spacers are 1.25 wide in the ends and use ½” bolts. Sway-A-Way’s 2.5” Smooth Body Bottom Mount Piggyback Shock utilize an innovative design which allows the shock body to swivel 360* for ease of installation. Taking the reservoir off the bottom of the cylinder provides that all of the oil must pass through the piston as it travels in the cylinder. This provides for more control and better performance.

All 2.5” shocks come standard with bright silver cadmium plated cylinders and high strength 7/8” Nitro Steel shafts that are chip and rust resistant. All 2.5 air shocks come with a tubular 1 5/8” Nitro Steel shafts. All shock cylinders except the air, bottom mount piggyback, and bypass shocks are threaded for both single & dual rate applications, and use standard 3” I.D. coil springs.

Shocks come standard with high strength Com 10 Teflon lined steel spherical bearings on each end with 304 stainless spacers. All aluminum parts are red anodized. Standard nitrogen pressure is 200 PSI for all shocks except the air shocks. Spacers are 1.25 wide in the ends and use ½” bolts. Sway-A-Way’s 2.5” Smooth Body Bottom Mount Piggyback Shock utilize an innovative design which allows the shock body to swivel 360* for ease of installation. Taking the reservoir off the bottom of the cylinder provides that all of the oil must pass through the piston as it travels in the cylinder. This provides for more control and better performance.

2.5" Remote Reservoir

56000-0108 Coilover 2.5x8 Remote Reservoir w/ Coilover Hardware

56000-0110 Coilover 2.5x10 Remote Reservoir w/ Coilover Hardware

56000-0112 Coilover 2.5x12 Remote Reservoir w/ Coilover Hardware

56000-0114 Coilover 2.5x14 Remote Reservoir w/ Coilover Hardware

56000-0116 Coilover 2.5x16 Remote Reservoir w/ Coilover Hardware

56000-0118 Coilover 2.5x18 Remote Reservoir w/ Coilover Hardware