|
|
|
|
|
|
ARP CHEVY LS CAM BOLT KIT
|
|
|
Cam Retainer Bolt, High Performance, Black Oxide, M8 x 1.25, 20mm UHL, Chevy, 4.8, 5.3, 5.7, 6.0L, Set of 4
|
|
|
|
|
|
|
|
|
|
METRIC M12X1.5 TO 1/8 NPT AUTOMETER
|
|
|
1/8 NPT TO M12X1.5
FOR USE WITH ELECTRIC OIL PRESSURE OIL TEMP & WATER TEMP GUAGES
COMMON USE ON CHEVY LS FOR WATER TEMP ADAPTER
|
|
|
|
|
|
|
|
|
|
LS VALVE COVER GASKETS 4.8 5.3 5.7 6.0
|
|
|
Fel-Pro's PermaDryPlus valve cover gaskets feature precision edge-molded silicone rubber, which resists high heat and delivers reliable sealing on irregular surfaces. This silicone rubber is wrapped around a rigid carrier that adds strength to the gasket to resist being sucked in under high vacuum or blown out when under pressure. At the same time, it also prevents over-tightening of the mounting bolts. Note, however, that these gaskets are not intended for race applications.
|
|
|
|
|
|
|
|
|
|
METRIC M16X1.5 TO 1/8 NPT AUTOMETER
|
|
|
1/8 NPT TO M16X1.5
FOR USE WITH ELECTRIC OIL PRESSURE OIL TEMP & WATER TEMP GUAGES
COMMON USE ON CHEVY LS FOR OIL PRESSURE ADAPTER
|
|
|
|
|
|
|
|
|
|
Auto Meter 2370 Temperature Adapter 3/8" Brass NPT
|
|
|
Brand:Auto Meter
Manufacturer's
Part Number: 2370
Part Type:Temperature Sender Fittings
Product Line:AutoMeter Temperature Adapters
UPC: 046074023705
Temperature Sender Fitting Material: Brass
Temperature Sender Fitting Finish: Natural
Quantity: Sold individually.
Notes: Designed for Auto Meter autogauge series gauges.
These AutoMeter temperature adapters allow you to easily adapt mechanical temperature gauges.
|
|
|
|
|
|
|
|
|
|
LS ENGINE MOUNT 34191
|
|
|
Product Description
These engine mount plates line up with the mounts on any Chevy LS engine.
Built from 1/4" steel
|
|
|
|
|
|
|
|
|
|
LS Steam-Port AN -4 Fittings
|
|
|
LS -4 WATER BYPASS FITTING REPLACE THE FACTORY CLAMP ON HOSE SYSTEM, MAKING IT MORE ADAPTABLE TO RACE CAR WATER SYSTEM PLUMBING. INCLUDES BOLTS AND O-RINGS
SOLD IN A PAIR 2 FITTINGS
|
|
|
|
|
|
|
|
|
|
LS CRANK SLEEVE TURBO 400
|
|
|
These Performance LS flexplate adapters will allow you to use an older-style automatic transmission and torque converter on your LS engine. They are made of high-strength steel and feature a special tapered end for easy installation.
|
|
|
|
|
|
|
|
|
|
CBM LS WATER NECK -20
|
|
|
CBM Custom water neck fitting for LS1, LS2, LS6, and LS7 style engines. This water neck is machined from a solid piece of 6061-T6 aircraft grade billet aluminum right here in the USA. It bolts in place of the factory angled unit and accepts a -20AN fitting. This unit accepts the original GM thermostat from a LS1, LS2, pre-2008 LS7. It will also work with many of the 4.8L, 5.3L, or 6.0L truck water pumps.
This neck will not fit 2008+ LS3, LS7, LS9, LSA, L76, or L92 water pumps.
|
|
|
|
|
|
|
|
|
|
LS Accessory Belt Tensioner Pulley
|
|
|
LS F-body Accessory Belt Tensioner Pulley. Stock Diameter 6 Rib Pulley with higher sidewalls for better belt retention. The pulley also has a replaceable bearing. Fits most LS Motors Keeps Belt on at high RPM.
|
|
|
|
