|
|
|
|
|
|
BALDWIN FILTER SMALL NO TOP PA675
|
|
|
REPLACE YOUR PUMPER FILTER EVERY RACE TO KEEP YOUR SYSTEM WORKING AT 100%
FITS NEXGEN PUMPER/PARKER PUMPER
4-1/4" Dia. x 3-5/16" TALL
|
|
|
|
|
|
|
|
|
|
Parker Pumper Short Air Filter for Pumpers w/ Wing Nut
|
|
|
Pumper replacement element should be replaced after every race. Keep a couple for dusty or longer races. 5" Dia. x 3" Tall
CACTUS,PCI,BDR
|
|
|
|
|
|
|
|
|
|
Parker Pumper TALL Air Filter for Pumpers w/ Wing Nut
|
|
|
5" DIA X 5 1/2 TALL
BDR FILTER
|
|
|
|
|
|
|
|
|
|
RUGGED RADIOS Pre-filter for MAC1 & MAC3.2 Pumper System
|
|
|
Pre-Filters are highly recommended for applications that are used in extremely rugged environments. Rugged Pre-Filters are manufactured from a durable water resistant polyester material. With uniform micro openings that filter out debris 5 microns and larger.
Fits the MAC1 & MAC3.2 air pumper filter.
|
|
|
|
|
|
|
|
|
|
PCI RACE AIR REPLACEMENT FILTER
|
|
|
Replacement Filter Element
You change your oil filter and your intake filter, you also need to change your Race Air Filter!
The Race Air replacement filter stops dirt and fine dust while allowing a consistent airflow of clean fresh air. Your race air filter is an often overlooked, essential component to your racing program. Make sure to have clean fresh air throughout your race with our washable replacement filter.
To clean your filter use an air compressor to blow out the dirt and dust from the inside -> outside. Rinse with warm water again keeping the flow going from the inside -> outside of the filter element. Shake off excess water and let it dry thoroughly before reinstalling. We recommend cleaning the filter after every dirt outing and replacing the filter every season.
*Always use your Race Air filters with the Race Air Aluminum Bonnet
Wash and thoroughly dry after each use
Change the filter every season
Easy to change filter with top wing nut
It is a good idea to keep a spare filter ready to use
|
|
|
|
|
|
|
|
|
|
RUGGED RADIOS Air filter for MAC1 & MAC3.2 Pumper Systems
|
|
|
MULTIPLE LAYERS OF DEFENSE AGAINST DIRT
Every Green Filter is hand-built using the finest materials available today. We start with a multiple layer breathable media combined with our unique filtration technology resulting in a superior filtration system.
All Premium Green Filters trap the smallest dirt particles that ordinary cotton-gauze “performance” filters can’t capture.
FULLY WASHABLE
These filters are built durable to last for a long time.
Each filter body is 100-percent washable and reusable
Clamp-on design comes with a replacement hose clamp to secure the filter to the 3" MAC1 or MAC3.2 Pumper intake.
Fits MAC1 or MAC3.2 Pumper System only
|
|
|
|
|
|
|
|
|
|
RUGGED RADIOS XL Pre-Filter for MAC1 & MAC3.2 Pumper Systems
|
|
|
Outerwears® Pre-Filters are highly recommended for applications that are used in extremely rugged environments. The Outerwears® Pre-Filters are manufactured from a durable water resistant polyester material. With uniform micro openings that filter out debris 5 microns and larger.
|
|
|
|
|
|
|
|
|
|
RUGGED RADIOS Air filter for MAC1 & MAC3.2 Pumper Systems
|
|
|
The 3" XL filter offers more surface area for increased filtration in intense, dirty conditions. When racing continuously through dust or plowing through massive silt beds, the XL filter will deliver clean, breathable, filtered air. Ideal for drivers and co-drivers competing in long distance races like the Mint 400, Vegas to Reno, and Baja.
MULTIPLE LAYERS OF DEFENSE AGAINST DIRT
Every Green Filter is hand-built using the finest materials available today. They start with a multiple layer breathable media combined with a unique filtration technology resulting in superior filtration.
All Premium Green Filters trap the smallest dirt particles that ordinary cotton-gauze “performance” filters can’t capture.
FULLY WASHABLE
These filters are built durable to last for a long time. Each filter body is 100-percent washable and reusable.
Clamp-on design comes with a replacement hose clamp to secure the filter to the 3" MAC1 or MAC3.2 Pumper intake.
Fits MAC1 or MAC3.2 Pumper System only.
|
|
|
|
