|
|
|
|
|
|
2.5" Wide Spring-3.0" Axle Tubes Spring Perches 3 Hole
|
|
|
Weld on spring Perches for a 3" Axle Tube Can Be Adjusted To Fit Larger. For 2.5" Wide Leaf Spring.
|
|
|
|
|
|
|
|
|
|
2.5" Wide Spring-3.0" Axle Tubes Spring Perches
|
|
|
Weld on spring Perches for a 3" Axle Tube Can Be Adjusted To Fit Larger. For 2.5" Wide Leaf Spring.
|
|
|
|
|
|
|
|
|
|
3.0" Wide Spring-3.0" Axle Tubes Spring Perches
|
|
|
Weld on spring Perches for a 3" Axle Tube Can Be Adjusted To Fit Larger. For 3.0" Wide Leaf Spring.
|
|
|
|
|
|
|
|
|
|
2.5 U BOLT PLATES R1159
|
|
|
These are designed for the standard 2.5" leaf spring. It will fit an axle from 2.5" to 3.5" in diameter and it will work with a 63" Chevy spring swap. All of our U bolt plates have 3 spring pin location options. They are .375" HR P&O Steel plate and can work with .5625" (9/16) to .625" (5/8) U bolts, we recommend 5/8", why use a lighter piece of steel when you don't have too? Sold in Pairs
SUPPLIED BY RUFFSTUFF SPECIALTIES
|
|
|
|
|
|
|
|
|
|
SPRING PLATES 2.5 WITH SHOCK MOUNTS
|
|
|
Pair
U Bolt Plates With U Bolt tabs in a weld together kit so you can save a few dollars and set the correct shock spacing by buying them together. They require welding but if you are capable these are for you! This is for 2 plates and 4 tabs, enough for 1 axle. These are made for 2.5" wide springs. Perfect for your prerunner or race truck
Sloted holes to fit many axles widths: 5 1/4-2 5/8-slot
|
|
|
|
|
|
|
|
|
|
2.5″ Spring and 3.25″ Housing U-bolt Eliminator Kit (WIY) DEAVER SPRING UNDER
|
|
|
WELD IT YOURSELF U-bolt eliminator kit for a 3.25 in housing with a 2.5 in spring. Designed to be easy to weld, and uses the spring perch for a 2.5 in spring and 3.25 in housing. Comes with enough to do one axle. cut from 3/16 p/o mild steel
|
|
|
|
