|
|
|
|
|
|
5/8 LINK PIN SHIMS
|
List Price: $1.25 Our Price: $0.80 Savings: $0.45
|
|
|
5/8 LINK PIN SHIMS
SOLD EACH
|
|
|
|
|
|
|
|
|
|
Axle Beam Clamp *EACH* AC430036 3161
|
|
|
MOUNT A VW FRONT BEAM TO A TUBE CHASSIS. ALSO USE THESE TO MOUNT ALUMINUM BEAM AND BAJA BUMPERS.
|
|
|
|
|
|
|
|
|
|
Thru Rod Clamp NUt
|
|
|
Sold Each
1/2 inch
Supplied By Latest Rage
|
|
|
|
|
|
|
|
|
|
Aluminum Spindle nuts , LINK PIN AND COMBO SPINDLES **PAIR** 9616
|
|
|
Aluminum LINK PIN AND COMBO SPINDLES **PAIR**
Includes one left and one right.
Supplied by Latest Rage
|
|
|
|
|
|
|
|
|
|
Weld-On Link Pin Spindle Gusset Kit ,4 piece ac430003 3166
|
|
|
Link Pin Spindle Gusset Kit, 4 pcs.,
Raw
Strengthen your stock Link Pin spindles with these gussets/supports.
The 4 piece kit includes two gussets that weld to the spindle carriers and two that weld to the spindles to triangulate the tie rod arms.
This helps these stock components withstand the extra stresses of off-road driving. Welding required.
|
|
|
|
|
|
|
|
|
|
5/8 LINK PIN BUSHINGS AC405055B 17-2757
|
List Price: $15.99 Our Price: $12.00 Savings: $3.99
|
|
|
SOLD EACH
5/8 LINK PIN BUSHING FOR 405055 LINK PINS OR 5/8 AFTERMARKET STYLE
SUPPLIED BY LATEST RAGE
empi, vw, baja, bug, race car, saco, sand rail
|
|
|
|
|
|
|
|
|
|
7/8 LINK PIN BUSHINGS AC405057B 17-2556
|
List Price: $15.99 Our Price: $12.00 Savings: $3.99
|
|
|
SOLD EACH
7/8 LINK PIN BUSHING FOR 405057 LINK PINS OR 7/8 AFTERMARKET STYLE
SUPPLIED BY LATEST RAGE
|
|
|
|
|
|
|
|
|
|
5/8 LINK PINS 4140 CHRMO
|
List Price: $18.99 Our Price: $15.88 Savings: $3.11
|
|
|
Sold each
Chromoly Heavy Duty Link Pins, 18mm Diameter Shaft ( Also Referred To As 5/8" Link Pins ) For 2-1/4" Or 4" Long Travel Front Trailing Arms.
850 32723
|
|
|
|
|
|
|
|
|
|
Rack Mount Pre-Welded*** DISCONTINUED***
|
|
|
Rack mount has pre-welded tabs to rest on the top beam for zero bump steer on a 6" over beam with our 2 1/4 longer arms.
Place on the center of the upper beam and rotate back about 21 degrees. Tack weld to the beam and check for bump steer. If bump steer still exist cut welds and re-rotate a degree or two and check for zero bump steer.
Welds to 2 " diameter beam
Designed for center load racks
or any rack with a 1 x 6 inch bolt pattern
|
|
|
|
|
|
|
|
|
|
TRAILING ARM THRU RODS, LONG TRAVEL 8" over beam
|
|
|
SOLD EACH
WIDTH BEAM - 46.5"
CLAMP NUTS SOLD SEPARATE PRT# 401021N
AC401021-8
SUPPLIED BY LATEST RAGE
|
|
|
|
