|
|
|
|
|
|
MR403 UTV NON BEADLOCK WHEEL 14X10 5+5/-2 OFFSET 4X156MM MATTE BLACK
|
|
|
The Mesh UTV is a non-beadlock UTV offering. With similar styling to the 406 UTV Beadlock, the Mesh UTV is available in a Matte Black finish with replaceable stainless steel decorative bolts around the outer lip and a screw-on hub cover. Applications range from 12”-14” with varying widths and offsets based on desired fitment and vehicle setup.
|
|
|
|
|
|
|
|
|
|
POLARIS RZR XP1K XP 1000 XP4 1000 HEAVY DUTY LONGER WHEEL STUD KIT 4 SETS
|
|
|
THIS IS THE UPGRADE YOU NEED IF YOU ARE RUNNING LARGER TIRES OR AFTERMARKET WHEELS. AFTER THE SECOND TIME I GOT LEFT IN THE DEZERT WITH A WHEEL PASSING ME BY I KNEW I HAD TO GET A FIX FOR IT AFTER CHECKING AROUND THE PRICES WERE OUTRAGEOUS SO WE CAME UP WITH ARE OWN KIT.
SO HERE IT IS LONGER ARP WHEELS STUDS UP SIZED TO 1/2 WITH SPLINE DRIVE LUG NUTS TO FIT IN THOSE PESKY WHEELS. THESE PRESS IN TO YOUR HUBS WITH OUT DRILLING AS THE KNURL IS JUST A LITTLE BIGGER WHICH TAKES UP YOUR OVALED OUT HOLES.
YOU WILL NEED TO DRILL YOUR RIMS OUT TO 17/32 FOR THE 1/2 STUDS TO FIT THRU. WE HAVE 1500 HARD MILES WITH 32" TIRES WE EVEN RAN WITH ONLY THREE LUG NUTS TO JUST PROVE A POINT FOR THE LAST 300 AND NO PROBLEMS SO WE ARE READY TO RELEASE THIS COMES WITH 16 STUDS 16 SPLINE LUG NUTS AND A SPLINE DRIVE TOOL.
KNURL LENGTH IS .7300 COMPARED TO STOCK .4550
UNDER HEAD LENGTH IS 2.50 COMPARED TO 2.25
WE HAVE OPEN ENDED LUG NUTS ALSO IF YOUR WHEEL HAS A FLAT FACE AND DOES NOT NEED SPLINE DRIVE NUTS.
|
|
|
|
