|
|
|
|
|
|
Empi 98-9615 Steel Brake Line With 10mm Fittings, 17" Length, Vw Bug-Ghia-Bus
|
|
|
ALL PLATED STEEL BRAKE LINES WITH 6MM FITTINGS IN A VARIETY OF LENGTHS. GREAT FOR REPLACING YOUR CONTAMINATED OR DAMAGED STOCK BRAKE LINES OR DESIGNED NEW LINES FOR DISC BRAKE CONVERSIONS.
10MMX1.0
|
|
|
|
|
|
|
|
|
|
Empi 98-9600-B Steel Brake Line With 10mm Fittings, 10.25" Length, Vw Bug-Ghia-Bus
|
|
|
ALL PLATED STEEL BRAKE LINES IN A VARIETY OF LENGTHS. GREAT FOR REPLACING YOUR CONTAMINATED OR DAMAGED STOCK BRAKE LINES OR DESIGNED NEW LINES FOR DISC BRAKE CONVERSIONS.
10MMX1.0
|
|
|
|
|
|
|
|
|
|
Empi 98-9634-B Steel Brake Line With 10mm Fittings, 32.25" Length, Vw Bug-Ghia-Bus
|
|
|
ALL PLATED STEEL BRAKE LINES IN A VARIETY OF LENGTHS. GREAT FOR REPLACING YOUR CONTAMINATED OR DAMAGED STOCK BRAKE LINES OR DESIGNED NEW LINES FOR DISC BRAKE CONVERSIONS.
10MMX1.0
|
|
|
|
|
|
|
|
|
|
Brake Lines Flex Hoses Front , With Drum Brakes,Type 1 1967-1977,EACH 98-6701-B
|
|
|
Empi 98-6701-B Front Rubber Brake Flex Hose For Type 1 Vw Bug, Ghia 1967 Thru 1977.
Don't Overlook The Brake Hoses When Doing Brake System Work, Even When Hoses Appear Good From The Outside, Aging Hoses Can Swell Shut On The Inside Causing Restricted Flow Resulting In Pulling Or Binding Of The Brakes.
Specs:
D.O.T. Approved Rubber OE Brake Hose
380mm Length
End Type = Male 10mm Bubble X Female 10mm Bubble
Application:
Volkswagen Type 1 Vw Bug 1967 Thru 1977 With Drum Brakes (Does Not Fit Super Beetle)
Volkswagen Type 1 Karmann Ghia 1967 Thru 1974 With Drum Brakes
Volkswagen Type 3 Squareback, Fastback, Notchback 1966 With Drum Brakes
Front Hose Left Or Right
OEM #113 611 701D
|
|
|
|
|
|
|
|
|
|
Empi 5587 STAINLESS STEEL HOSE KIT 69-ON
|
|
|
EMPI's Stainless Steel Brake Lines are made of super tough braided stainless steel covers over Teflon hose, and are D.O.T. approved - which is important in such a critical part as a brake hose. Because they are made with the stock size fittings, no adapters are needed to insure a correct fit, and it lessens the chance of leakage. Stainless Steel Brake Line Kits must be installed at all four corners, never mix rubber and stainless in the same brake system. Caution should be used when installing any new brake line. If you have any doubt about your ability to install them correctly, please let a trained professional mechanic do the job. Made in USA.
|
|
|
|
