SHOP BY CATEGORY

PAYMENTS
Home > Utv/Sxs > S&B PARTICLE SEPARATOR
Sort By:
Page of 1
S&B Filters 76-2004 Particle Separator Air Box for 16 17 Yamaha YXZ1000R UTV
S&B Filters 76-2004 Particle Separator Air Box for 16 17 Yamaha YXZ1000R UTV
Our Price: $399.00

BETTER FILTRATION Your YXZ Filter Stays Clean Since the S&B Particle Separator ejects 94% of the dust before it reaches your stock filter, you won't have to replace your filter as frequently saving you time and money. RAM AIR Get More Air Flow When installed on the upper roll bar, the Particle Separator provides RAM air to the engine. With this additional airflow, your Yamaha YXZ will maintain the highest level of performance in horsepower and fuel economy.
Efficiency Rating 94% Amp Draw 3.1 amps Clamp Diameter 1.50" Duct Length 39" Weight 16.0000 Dimensions 20.2" W x 10.5" H x 10" D UPC 841372035968 more info
S&B Filters 76-2000 Particle Separator Air Box for 14-17 Polaris RZR 1000 XP EPS
S&B Filters 76-2000 Particle Separator Air Box for 14-17 Polaris RZR 1000 XP EPS
Our Price: $399.00

Application: 2014-17 Polaris RZR XP 1000 / 2016 RZR XP Turbo
(DOES NOT FIT 2017 AND 2018 TURBO)
Do you take your Polaris RZR XP Turbo through a lot of dusty conditions? If you travel to the sand dunes a lot or even through dusty trails, you're probably having to replace your air filter a lot and you're experiencing a loss of performance. Right here we have the perfect solution for you with the S&B Filters Particle Separator. Particle separators have been used in the military for their helicopters when landing in extremely dusty terrain such as Afghanistan and Iraq. S&B Filters decided to bring that advanced technology into the UTV world. How does it work? Dirty air is sucked into the 19 vortexes, which is then spun and the centrifugal force throws the dust against the outer tubes. This dirty air exits through the rear slot while clean air moves forward and into your air filter. Scavenge fans eject dust through the exhaust. These fans are rated for 50,000 hours in harsh conditions and draw only 3.1 amps. Now that you know how it works, lets talk about fitment. Billet clamps allow you to install the separator to either the upper or lower roll bars of your Polaris RZR XP 1000, making it truly versatile. No need to buy a special air filter, simply use your stock air filter system. A silicone tube attaches to the stock air inlet opening and the provided side cover replaces the frogskin. With this particle separator installed, you won't experience the power loss associated with a clogged air filter. Astonishingly, a stock filter system reaches capacity after only 74 grams of dust but by adding this, you ingest around 2,5000 grams of dust before changing your filter. Not only will you save money by not having to replace your air filter as often since you'll eject approximately 94% of the dust before it even reaches the filter, but since you're not running a clogged filter, you're engine can work easier. Check out the features below and even more importantly, the video of real world results. Features: Product dimensions: 20.2" wide x 10.5" high x 10" deep Weighs 11 lbs. Duct length of 39" Clamp diameter of 1.75" Efficiency rate of 94% Amp draw of 3.1 amps Attached directly to the stock intake system Installation takes approximately 2 hour with no drilling or cutting on your machine required Manufacturers 5 year limited warranty more info
S&B Filters 76-2007 Particle Separator Air Box for 17-18 Polaris RZR TURBO XP
S&B Filters 76-2007 Particle Separator Air Box for 17-18 Polaris RZR TURBO XP
Our Price: $399.00

Application: 2017-2018 Polaris RZR XP Turbo

Do you take your Polaris RZR XP Turbo through a lot of dusty conditions? If you travel to the sand dunes a lot or even through dusty trails, you're probably having to replace your air filter a lot and you're experiencing a loss of performance. Right here we have the perfect solution for you with the S&B Filters Particle Separator. Particle separators have been used in the military for their helicopters when landing in extremely dusty terrain such as Afghanistan and Iraq. S&B Filters decided to bring that advanced technology into the UTV world. How does it work? Dirty air is sucked into the 19 vortexes, which is then spun and the centrifugal force throws the dust against the outer tubes. This dirty air exits through the rear slot while clean air moves forward and into your air filter. Scavenge fans eject dust through the exhaust. These fans are rated for 50,000 hours in harsh conditions and draw only 3.1 amps. Now that you know how it works, lets talk about fitment. Billet clamps allow you to install the separator to either the upper or lower roll bars of your Polaris RZR XP 1000, making it truly versatile. No need to buy a special air filter, simply use your stock air filter system. A silicone tube attaches to the stock air inlet opening and the provided side cover replaces the frogskin. With this particle separator installed, you won't experience the power loss associated with a clogged air filter. Astonishingly, a stock filter system reaches capacity after only 74 grams of dust but by adding this, you ingest around 2,5000 grams of dust before changing your filter. Not only will you save money by not having to replace your air filter as often since you'll eject approximately 94% of the dust before it even reaches the filter, but since you're not running a clogged filter, you're engine can work easier. Check out the features below and even more importantly, the video of real world results. Features: Product dimensions: 20.2" wide x 10.5" high x 10" deep Weighs 11 lbs. Duct length of 39" Clamp diameter of 1.75" Efficiency rate of 94% Amp draw of 3.1 amps Attached directly to the stock intake system Installation takes approximately 2 hour with no drilling or cutting on your machine required Manufacturers 5 year limited warranty more info
S&B Filters 76-2001 Particle Separator Air Box for 15-17 Polaris 900-1000S
S&B Filters 76-2001 Particle Separator Air Box for 15-17 Polaris 900-1000S
Our Price: $399.00

Application: 2015-2017 900 1000S

Do you take your Polaris RZR through a lot of dusty conditions? If you travel to the sand dunes a lot or even through dusty trails, you're probably having to replace your air filter a lot and you're experiencing a loss of performance. Right here we have the perfect solution for you with the S&B Filters Particle Separator. Particle separators have been used in the military for their helicopters when landing in extremely dusty terrain such as Afghanistan and Iraq. S&B Filters decided to bring that advanced technology into the UTV world. How does it work? Dirty air is sucked into the 19 vortexes, which is then spun and the centrifugal force throws the dust against the outer tubes. This dirty air exits through the rear slot while clean air moves forward and into your air filter. Scavenge fans eject dust through the exhaust. These fans are rated for 50,000 hours in harsh conditions and draw only 3.1 amps. Now that you know how it works, lets talk about fitment. Billet clamps allow you to install the separator to either the upper or lower roll bars of your Polaris RZR XP 1000, making it truly versatile. No need to buy a special air filter, simply use your stock air filter system. A silicone tube attaches to the stock air inlet opening and the provided side cover replaces the frogskin. With this particle separator installed, you won't experience the power loss associated with a clogged air filter. Astonishingly, a stock filter system reaches capacity after only 74 grams of dust but by adding this, you ingest around 2,5000 grams of dust before changing your filter. Not only will you save money by not having to replace your air filter as often since you'll eject approximately 94% of the dust before it even reaches the filter, but since you're not running a clogged filter, you're engine can work easier. Check out the features below and even more importantly, the video of real world results. Features: Product dimensions: 20.2" wide x 10.5" high x 10" deep Weighs 11 lbs. Duct length of 39" Clamp diameter of 1.75" Efficiency rate of 94% Amp draw of 3.1 amps Attached directly to the stock intake system Installation takes approximately 2 hour with no drilling or cutting on your machine required Manufacturers 5 year limited warranty more info
S&B Filters 76-2002 Particle Separator Air Box for 11-14 Polaris 900
S&B Filters 76-2002 Particle Separator Air Box for 11-14 Polaris 900
Our Price: $399.00

Application: 2011-2014 900

Do you take your Polaris RZR through a lot of dusty conditions? If you travel to the sand dunes a lot or even through dusty trails, you're probably having to replace your air filter a lot and you're experiencing a loss of performance. Right here we have the perfect solution for you with the S&B Filters Particle Separator. Particle separators have been used in the military for their helicopters when landing in extremely dusty terrain such as Afghanistan and Iraq. S&B Filters decided to bring that advanced technology into the UTV world. How does it work? Dirty air is sucked into the 19 vortexes, which is then spun and the centrifugal force throws the dust against the outer tubes. This dirty air exits through the rear slot while clean air moves forward and into your air filter. Scavenge fans eject dust through the exhaust. These fans are rated for 50,000 hours in harsh conditions and draw only 3.1 amps. Now that you know how it works, lets talk about fitment. Billet clamps allow you to install the separator to either the upper or lower roll bars of your Polaris RZR XP 1000, making it truly versatile. No need to buy a special air filter, simply use your stock air filter system. A silicone tube attaches to the stock air inlet opening and the provided side cover replaces the frogskin. With this particle separator installed, you won't experience the power loss associated with a clogged air filter. Astonishingly, a stock filter system reaches capacity after only 74 grams of dust but by adding this, you ingest around 2,5000 grams of dust before changing your filter. Not only will you save money by not having to replace your air filter as often since you'll eject approximately 94% of the dust before it even reaches the filter, but since you're not running a clogged filter, you're engine can work easier. Check out the features below and even more importantly, the video of real world results. Features: Product dimensions: 20.2" wide x 10.5" high x 10" deep Weighs 11 lbs. Duct length of 39" Clamp diameter of 1.75" Efficiency rate of 94% Amp draw of 3.1 amps Attached directly to the stock intake system Installation takes approximately 2 hour with no drilling or cutting on your machine required Manufacturers 5 year limited warranty more info
   
 
It all started with a great idea and a little hard work. Today we're proud to provide quality products direct to your doorstep through an experience you'll enjoy. And most of all, we hope you'll enjoy the products as much as we do. Call or email us today to let us know what you think. We'd love to hear from you!